
218 | Adaptive Radio Management AOS-W Instant 6.3.1.1-4.0 | User Guide
40 enable
44 enable
48 enable
52 enable
56 enable
60 enable
64 enable
149 enable
153 enable
157 enable
161 enable
165 enable
36+ enable
44+ enable
52+ disable
60+ disable
149+ enable
157+ enable
36E enable
52E enable
149E enable
Configuring Radio Settings for an OAW-IAP
You can configure 2.4 GHz and 5 GHz radio settings for an OAW-IAP either using AOS-W Instant UI or CLI.
In the AOS-W Instant UI
To configure radio settings:
1. Click the RF link at the top right corner of the AOS-W Instant main window.
2. Click Show advanced options. The advanced options are displayed.
3. Click the Radio tab.
4. Under the channel 2.4.GHz or 5GHz or both, configure the following parameters.
Parameter Description
Legacy only Select Enabled to run the radio in non-802.11n mode. This option is set to Disabled
by default.
802.11d /
802.11h
Select Enabled to allow the radio to advertise its 802.11d (Country Information) and
802.11h (Transmit Power Control) capabilities. This option is set to Disabled by
default.
Beacon interval Enter the Beacon period for the OAW-IAP in milliseconds. This indicates how often
the 802.11 beacon management frames are transmitted by the access point. You
can specify a value within the range of 60-500. The default value is 100
milliseconds.
Interference
immunity level
Select to increase the immunity level to improve performance in high-interference
environments.
The default immunity level is 2.
l Level 0— no ANI adaptation.
l Level 1— Noise immunity only. This level enables power-based packet detection
by controlling the amount of power increase that makes a radio aware that it has
received a packet.
Table 42:
Radio Configuration Parameters
Kommentare zu diesen Handbüchern