Alcatel-Lucent IAP93 Betriebsanweisung PDF herunterladen (Seite 219)

Parameter Description

l Level 2— Noise and spur immunity. This level also controls the detection of

OFDM packets, and is the default setting for the Noise Immunity feature.

l Level 3— Level 2 settings and weak OFDM immunity. This level minimizes false

detects on the radio due to interference, but may also reduce radio sensitivity.

This level is recommended for environments with a high-level of interference

related to 2.4 GHz appliances such as cordless phones.

l Level 4— Level 3 settings, and FIR immunity. At this level, the AP adjusts its

sensitivity to in-band power, which can improve performance in environments

with high and constant levels of noise interference.

l Level 5— The AP completely disables PHY error reporting, improving

performance by eliminating the time the OAW-IAP would spend on PHY

processing.

NOTE: Increasing the immunity level makes the AP to lose a small amount of range.

Channel switch

announcement

count

Specify the count to indicate the number of channel switching announcements that

must be sent before switching to a new channel. This allows associated clients to

recover gracefully from a channel change.

Background

spectrum

monitoring

Select Enabled to allow the APs in access mode to continue with normal access

service to clients, while performing additional function of monitoring RF interference

(from both neighboring APs and non Wi-Fi sources such as, microwaves and

cordless phones) on the channel they are currently serving clients.

5. Reboot the OAW-IAP after configuring the radio profile settings.

In the CLI

To configure 2.4 GHz radio settings:

(Instant Access Point)(config)# rf dot11g-radio-profile

(Instant Access Point)(RF dot11 g Radio Profile)# beacon-interval <milliseconds>

(Instant Access Point)(RF dot11 g Radio Profile)# legacy-mode

(Instant Access Point)(RF dot11 g Radio Profile)# spectrum-monitor

(Instant Access Point)(RF dot11 g Radio Profile)# dot11h

(Instant Access Point)(RF dot11 g Radio Profile)# interference-immunity <level>

(Instant Access Point)(RF dot11 g Radio Profile)# csa-count <count>

(Instant Access Point)(RF dot11 g Radio Profile)# max-distance <count>

(Instant Access Point)(RF dot11 g Radio Profile)# end

(Instant Access Point)# commit apply

To configure 5 GHz radio settings:

(Instant Access Point)(config)# rf dot11a-radio-profile

(Instant Access Point)(RF dot11a Radio Profile)# beacon-interval <milliseconds>

(Instant Access Point)(RF dot11a Radio Profile)# legacy-mode

(Instant Access Point)(RF dot11a Radio Profile)# spectrum-monitor

(Instant Access Point)(RF dot11a Radio Profile)# spectrum-band <type>

(Instant Access Point)(RF dot11a Radio Profile)# dot11h

(Instant Access Point)(RF dot11a Radio Profile)# interference-immunity <level>

(Instant Access Point)(RF dot11a Radio Profile)# max-distance <count>

(Instant Access Point)(RF dot11a Radio Profile)# csa-count <count>

(Instant Access Point)(RF dot11 g Radio Profile)# end

(Instant Access Point)# commit apply

To view the radio configuration:

(Instant Access Point)# show radio config

Legacy Mode:enable

Beacon Interval:100

AOS-W Instant 6.3.1.1-4.0 | User Guide Adaptive Radio Management | 219

1 2 ... 214 215 216 217 218 219 220 221 222 223 224 ... 334 335

Kommentare zu diesen Handbüchern

Keine Kommentare

Alcatel-Lucent IAP93 Betriebsanweisung Seite 219

Kommentare zu diesen Handbüchern