Alcatel-Lucent IAP93 Betriebsanweisung PDF herunterladen (Seite 88)

88 | Wireless Network Profiles AOS-W Instant 6.3.1.1-4.0 | User Guide

Parameter Description

In a non-WMM or hybrid environment, where some clients are not WMM-capable, you can

allocate higher values for Best effort WMMshare and Voice WMM share to allocate a higher

bandwidth to clients transmitting best effort and voice traffic.

Content filtering

Select Enabled to route all DNS requests for the non-corporate domains to OpenDNS on this

network.

Band

Select a value to specify the band at which the network transmits radio signals. You can set

the band to 2.4 GHz, 5 GHz, or All. The All option is selected by default.

Inactivity timeout

Specify an interval for session timeout. If a client session is inactive for the specified duration,

the session expires and the users are required to log in again. The minimum value is set to

60 seconds and the default value is 1000 seconds.

Hide SSID

Select this checkbox if you do not want the SSID (network name) to be visible to users.

Disable SSID

Select this checkbox if you want to disable the SSID. On selecting this, the SSID will be

disabled, but will not be removed from the network. By default, all SSIDs are enabled.

Can be used without

Uplink

Select the checkbox if you do not want to SSID profile to use uplink.

Max clients threshold

Specify the maximum number of clients that can be configured for each BSSID on a WLAN.

You can specify a value within the range of 0 to 255. The default value is 64.

Local probe request

threshold

Specify a threshold value to limit the number of incoming probe requests. When a client

sends a broadcast probe request frame to search for all available SSIDs, this option controls

system response for this network profile and ignores probe requests if required. You can

specify a Received signal strength indication (RSSI) value within range of 0 to 100 dB.

Table 17:

WLAN Configuration Parameters

5. Click Next to configure VLAN settings. For more information, see Configuring VLAN Settings for a WLAN SSID

Profile on page 89.

In the CLI

To configure WLAN settings for an SSID profile:

(Instant Access Point)(config)# wlan ssid-profile <name>

(Instant Access Point)(SSID Profile <name>)# essid <ESSID-name>

(Instant Access Point)(SSID Profile <name>)# type {<Employee> | <Voice>| <Guest>}

(Instant Access Point)(SSID Profile <name>)# broadcast-filter <type>

(Instant Access Point)(SSID Profile <name>)# dtim-period <number-of-beacons>

(Instant Access Point)(SSID Profile <name>)# multicast-rate-optimization

(Instant Access Point)(SSID Profile <name>)# dynamic-multicast-optimization

(Instant Access Point)(SSID Profile <name>)# dmo-channel-utilization-threshold

(Instant Access Point)(SSID Profile <name>)# a-max-tx-rate <rate>

(Instant Access Point)(SSID Profile <name>)# a-min-tx-rate <rate>

(Instant Access Point)(SSID Profile <name>)# g-max-tx-rate <rate>

(Instant Access Point)(SSID Profile <name>)# g-min-tx-rate <rate>

(Instant Access Point)(SSID Profile <name>)# bandwidth-limit <limit>

(Instant Access Point)(SSID Profile <name>)# per-user-bandwidth-limit <limit>

(Instant Access Point)(SSID Profile <name>)# air-time-limit <limit>

(Instant Access Point)(SSID Profile <name>)# wmm-background-share <percentage-of-traffic_shar

(Instant Access Point)(SSID Profile <name>)# wmm-best-effort-share<percentage-of-traffic-shar

(Instant Access Point)(SSID Profile <name>)# wmm-video-share <percentage-of-traffic_share>

(Instant Access Point)(SSID Profile <name>)# wmm-voice-share <percentage-of-traffic_share>

(Instant Access Point)(SSID Profile <name>)# rf-band {<2.4>|<5.0>|<all>}

1 2 ... 83 84 85 86 87 88 89 90 91 92 93 ... 334 335

Kommentare zu diesen Handbüchern

Keine Kommentare

Alcatel-Lucent IAP93 Betriebsanweisung Seite 88

Kommentare zu diesen Handbüchern